Crystal Minx Tail Plug: Faux Fur Care and Storage Tips

By Glass Butt Plugs, Anal Toys, Crystal Dildoes | Published: 2026-11-04

Category: Tips & Perawatan

Keep your Crystal Minx tail plug's faux fur soft and its glass body spotless with a simple cleaning, drying, and storage routine that protects both materials.

Quick answer

Clean the glass plug and the faux fur separately, dry both completely, and store the plug hanging or loosely wrapped so the tail doesn't crush. Skip this separation and you'll either mat the fur or leave moisture on the glass.

Why the two materials need different treatment

The Crystal Minx pairs a borosilicate glass plug with a permanently attached faux fur tail. Glass tolerates warm water and mild soap, but faux fur fibers can mat or warp if they're soaked or rubbed vigorously. Treating them as one piece usually means one material suffers.

The glass also needs to dry fully before storage to avoid water spots or a damp environment, while the fur needs air circulation to stay fluffy. A two-part routine solves both without much extra time.

What to skip to protect the fur and the finish

Avoid bleach, alcohol, and oil-based cleaners on the fur—they can break down synthetic fibers or leave a residue. On the glass, skip abrasive scrubbers that could dull the surface over time.

Don't put the plug in a dishwasher or submerge the fur completely; the glued joint and the fibers aren't designed for that. If the plug has a strong odor after use, a dedicated toy cleaner on the glass only is a better choice than soaking the whole piece.

Step-by-step care and storage routine

Clean the glass first: Wash the glass plug with warm water and mild, unscented soap, rubbing gently with your fingers or a soft cloth. Keep the fur pointed away from the water stream. Common mistake: soaking the whole plug, which wets the fur and weakens the attachment over time. Check the base and stem for any residue before rinsing.
Spot-clean the faux fur: Dampen a soft cloth with cool water and a drop of mild soap, then dab the fur only where needed. Work in the direction of the fibers, not against them. Common mistake: scrubbing back and forth, which mats the pile. If the fur is heavily soiled, a specialized faux fur cleaner is safer than home remedies.
Rinse and blot, don't wring: Rinse the glass under running water while keeping the fur clear. For the fur, blot with a clean towel—never wring or twist. Common mistake: squeezing the tail to speed drying, which crushes the fibers. The fur should feel damp, not dripping, before you move to drying.
Air-dry both parts completely: Stand the plug upright in a well-ventilated spot or hang it by the base so air reaches the fur. Let the glass air-dry fully. Common mistake: storing while damp, which can encourage mildew in the fur and water spots on the glass. Give it at least a few hours; if the fur still feels cool and damp, wait longer.
Fluff and store loosely: Once dry, gently fluff the fur with your fingers. Store the plug in a breathable pouch or hang it so the tail isn't compressed. Common mistake: tossing it into a crowded drawer where the fur gets crushed or snagged. Keep it away from direct sunlight and heat, which can fade or stiffen the fur.
Do a quick check before each use: Inspect the glass for chips or cracks and the fur for loose fibers or separation at the base. If you see damage, don't use it. Common mistake: assuming glass is indestructible—borosilicate is tough but can chip if dropped. A 10-second check prevents surprises.

Product facts

Husky Crystal Minx Faux Fur Tail Plug: Handcrafted in the USA from properly hardened borosilicate glass with a slender stem and flared base. The smooth glass body is easy to wipe clean, but the flared base means you should support the plug from the base when handling it wet.
Husky Crystal Minx Faux Fur Tail Plug